Size (Approx) : approximately 2.25 inch wide x 2.25 tall

THESE PARTICULAR PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HIGH HEAT IS APPLIED TO IT.

The patch can be applied with an iron or a heat press.

The post ‘Have a Good Day’ Smile Floral Embroidery Iron On Patch appeared first on Pretty Preppy Co..

These High Quality Patches can be applied to denim, 100% cotton, and polyester/cotton blends on light and dark colored garments. They can be applied to robes, hats, bags, t-shirts, sweatshirts and so much more!

Size (Approx) :  2.5 inches Tall by 3.6 inches wide
Backing: Iron On

The post Small Brown ‘Darlin’ Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) :  1x2 inches
Backing: Iron On
The patches can be applied with an iron or a heat press.

The post Small Pink ‘Bad Hair Day’ Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) :  6.75 x 3.5" tall
Backing: Iron On

THESE PARTICULAR PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HIGH HEAT IS APPLIED TO IT.

The patches can be applied with an iron or a heat press.

Iron Application Instructions:

When applying the patches with an iron, set your iron to high heat.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 10-20 seconds.

Position patche on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press firmly straight down onto letter patches for 45 seconds in place. DO NOT MOVE IRON BACK AND FORTH.

Turn your garment inside out and press firmly straight down for 30 seconds in place

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

Heat Press Application Instructions:

When applying the patches with a heat press, set your heat press temperature to 310 degrees Fahrenheit, the timer to 20 seconds, and the pressure to medium.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 3-5 seconds.

Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press patches for 20 seconds.

Turn your garment inside out and repeat Step 5.

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

The post Large Guitar Cow Print Chenille Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) :  6.75 inches wide x 3.5" tall
Backing: Iron On

The post Cowboy Hat Chenille Gold Glitter Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) :  3.5" x 2" tall
Backing: Iron On

THESE PARTICULAR PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HIGH HEAT IS APPLIED TO IT.

The patches can be applied with an iron or a heat press.

Iron Application Instructions:

When applying the patches with an iron, set your iron to high heat.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 10-20 seconds.

Position patche on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press firmly straight down onto letter patches for 45 seconds in place. DO NOT MOVE IRON BACK AND FORTH.

Turn your garment inside out and press firmly straight down for 30 seconds in place

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

Heat Press Application Instructions:

When applying the patches with a heat press, set your heat press temperature to 310 degrees Fahrenheit, the timer to 20 seconds, and the pressure to medium.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 3-5 seconds.

Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press patches for 20 seconds.

Turn your garment inside out and repeat Step 5.

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

The post Small Neon Pink Cowboy Hat Chenille Gold Glitter Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) : 3 x 2.5 inches

Material: Felt

Backing: Iron On

THESE PARTICULAR PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HIGH HEAT IS APPLIED TO IT.

The patches can be applied with an iron or a heat press.

Iron Application Instructions:

When applying the patches with an iron, set your iron to high heat.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 10-20 seconds.

Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press firmly straight down onto patches for 45 seconds in place. DO NOT MOVE IRON BACK AND FORTH.

Turn your garment inside out and press firmly straight down for 30 seconds in place

Let area cool for 60 seconds. If your patches do not fully adhere, then repeat Step 5.

Heat Press Application Instructions:

When applying the patches with a heat press, set your heat press temperature to 310 degrees Fahrenheit, the timer to 20 seconds, and the pressure to medium.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 3-5 seconds.

Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press patches for 20 seconds.

Turn your garment inside out and repeat Step 5.

Let area cool for 60 seconds. If your patches do not fully adhere, then repeat Step 5.

The post Brown Cowboy Boot Felt Embroidery Iron On Patch appeared first on Pretty Preppy Co..

Size (Approx) : 3 x 2 inches

Material: Felt

Backing: Iron On

THESE PARTICULAR PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HIGH HEAT IS APPLIED TO IT.

The patches can be applied with an iron or a heat press.

The post Pink and Teal Cowgirl Boot Felt Embroidery Iron On Patch appeared first on Pretty Preppy Co..

Listing is for the PATCH only

This is an IRON-ON or SEW-ON PATCH NOT a Sticker!

Perfect for DIY! Sweatshirts, Bags...etc.!

Size: 11.25" Wide - 9.75" Height

1. Place the "Santa Baby" letter patch on the material chenille side up

2. Place cotton fabric over patch (or Teflon *preferred/Parchment Paper).

3. Iron over patch, applying pressure, on high (approx. 150) for about 30 seconds without steam.

4. Iron inside of garment underneath patch for 30 seconds

*Repeat as necessary

Professional Heat press temp is about 320 degrees, but temperature could vary by machine. Do not apply direct heat to the chenille

side of the patch without protective layer (or Teflon *preferred/Parchment Paper). Always press from underneath - garment or bag/item inside out

We are not responsible for melting or overheating.

We recommend testing the patch with several temperatures and methods best for you and your machine.

Every heat press is different.

Make sure adhesive melts (without bleeding out the sides of letter/patch) and the patch is firmly attached, and the edges are secure.

If you plan on washing item after attaching letters, it is recommended that the letters

are machine stitched to prevent patches from falling off.

Wide applications: these sew on letter patches are nice iron patches for sheets, jeans, hats, shoes, clothing decoration and so on,

both for kids and adults' clothes, and you can also apply them to other aspects

Machine wash delicate, always cold water no bleach or fabric softeners

Air dry is the best option - never dry on heat cycle or use fabric softeners

The post Hot Pink Merry and Bright Chenille Sparkle Glitter Iron On Patch appeared first on Pretty Preppy Co..

Listing is for the PATCH only

This is an IRON-ON or SEW-ON PATCH NOT a Sticker!

Perfect for DIY! Sweatshirts, Bags...etc.!

Size: 11.25" Wide - 9.75" Height

1. Place the "Santa Baby" letter patch on the material chenille side up

2. Place cotton fabric over patch (or Teflon *preferred/Parchment Paper).

3. Iron over patch, applying pressure, on high (approx. 150) for about 30 seconds without steam.

4. Iron inside of garment underneath patch for 30 seconds

*Repeat as necessary

Professional Heat press temp is about 320 degrees, but temperature could vary by machine. Do not apply direct heat to the chenille

side of the patch without protective layer (or Teflon *preferred/Parchment Paper). Always press from underneath - garment or bag/item inside out

We are not responsible for melting or overheating.

We recommend testing the patch with several temperatures and methods best for you and your machine.

Every heat press is different.

Make sure adhesive melts (without bleeding out the sides of letter/patch) and the patch is firmly attached, and the edges are secure.

If you plan on washing item after attaching letters, it is recommended that the letters

are machine stitched to prevent patches from falling off.

Wide applications: these sew on letter patches are nice iron patches for sheets, jeans, hats, shoes, clothing decoration and so on,

both for kids and adults' clothes, and you can also apply them to other aspects

Machine wash delicate, always cold water no bleach or fabric softeners

Air dry is the best option - never dry on heat cycle or use fabric softeners

The post White Merry and Bright Chenille Sparkle Glitter Iron On Patch appeared first on Pretty Preppy Co..